Support
Center
 Rhino Not Detecting the Asterisk T1 Link
Solution

Rhino Not Detecting the Asterisk T1 Link

Introduction

When you connect your Rhino T1/E1/J1 product it does not see the link.

Resolution

Only two real issues to look for here -- is Asterisk running with the T1 span configured? If so, next check that you are using a cross-over cable, that is, pins 1-2 and 4-5 need to "cross" from one end of the cable to the other. The Rhino Channel Banks comes with two cables, be sure to choose the proper one!

Applies To

CB24, R1T1, R2T1, R4T1

Keywords

T1, No Link, Rj48



 Login [Lost Password] 
Email:
Password:
Remember Me:
 
 Search
 Article Options